100-10,000 RPM/flash per min. Accuracy: +/- (.05% +1d).
Your Rating Rate… Perfect Good Average Not that bad Very Poor
Your Review
Name *
Email *
There are no reviews yet.
With four toothed wheels each 75 mm dia, fixed 6 mm apart on a shaft, projecting as spindle with slight taper at its end. Wheels have 36, 45, 54, and 72 teeth respectively, used with whirling table
Mounted on sturdy streamlined base with provision for horizontal or vertical use, fork is manufactured from selected steel. Prong is 10 x 25 x 300 mm. accurate frequency adjustment, vibrations rate 60 per second. Electromagnet can work on 6 Volts. The amplitude of vibration can vary by sliding the electromagnet inside the prongs.
It comprises two aluminium tubes telescoping into each other, so that the column of air within the tubes may be altered from 30 cms to 53 cms, outer tube fits into a wooden base.
It consists of a tube 100cm long, 25mm dia mounted on a stand which is fitted with leveling screws. The lower end of the rubber tubing provided is connected to the 500ml glass reservoir which slides on a metal rod and can be raised or lowered for adjusting the length of column of air. It is used to measure the velocity of sound waves in air at room temperature by using a tuning fork.
There are no reviews yet.