Un-mounted glass tube, limbs with a third short limb for connecting a suction tube
Your Rating Rate… Perfect Good Average Not that bad Very Poor
Your Review
Name *
Email *
There are no reviews yet.
Demonstration type, fully enclosed in a transparent synthetic case for demonstration. 100 mm coated dial reads from 28 to 32 inches and 950 to 1040 millibars, air tight sealed all around, pressure rubber bulb provided to force the movements, for educative demonstration.
Circular gauge reads 0 to 50 lb./in x 1 & o to 3.5 Kg/cm x 0.1 actual (total) pressure with clear perspex back so that the working parts may be seen.
A working model of a clear glass to show and explain the principle involved. It has a cylinder of 25 mm dia and overall lengths of 350 mm, cylinder is provided with non-return float valves and outlet is by means of a side tube.
A glass tube of 6mm bore is enclosed in an enamelled and lacquered brass case, mounted on a polished wooden board with plates for fixing on wall. Open plate reflectors, ring and screws for vertical adjustments. A dual scale graduated in 25 to 32 inches and 640 to 810mm is read by verniers moving by rack and pinion, reading to 0.002 inch and 0.1mm are enclosed in a glass cylinder. A glass cistern at the lower end of barometer is provided with an ivory point to adjust the level of mercury. A thermometer -10 to 50C is provided on the wooden board. Supplied without mercury and glass case.
There are no reviews yet.