Electricity & Cell Lab
Demonstration Dynamo
This model uses the same basic assembly as the electric motor, mounted on a base plate which also carries a hand drive pulley 120 mm in diameter coupled to the smaller dynamo pulley by a rubber belt. Electric output is via a pair of 4 mm socket & a light emitting diode is provided as simple output indicator. The model may also be used as motor on a 4 to 8 volts DC supply.
Related products
-
Electricity & Cell Lab
Ballistic Galvanometer
Used for measurement of small quantities of electrical charge.
Levelling Screws for balancing the coil. Coil with mirror suspended between long suspension at the upper end and a spring at lower end. Suspension and spring are made of phosphor bronze alloy. Bakelite case, rigid and robust. Clamping arrangement for transportation. Consistent sensitivity over a large period. Strip provided for making it a periodic
SKU: n/a -
Electricity & Cell Lab
Demonstration Dynamo Model A.C
A simple demonstration of a Dynamo Model mounted on a wooden base. Hand driven by a gear. Simplified open frame construction which can be readily understood without detriments to its essential similarity to real machine. A 2 pole armature wound by enamelled copper wire to rotate in U shape magnet in pivot. While in rotation process through the gear wheel by hand, the bulb provided glows.
SKU: n/a -
Electricity & Cell Lab
Coil 120 Turns
Each centre hole coil is wound on a plastic former & is provided with 4 mm socketed terminals.
The coil fits onto a double ‘C’ core, provides a suitable transformer for operation from a low voltage AC supply. In addition, it provides a useful electromagnet if used on one half of a ‘C’ core.
SKU: n/a
There are no reviews yet.