Physics Lab
Showing 166–180 of 383 results
-
Engines & Heat Physics Labware
Hopes Apparatus
To show that water has a maximum density at 4 degrees Celsius..
Consists of a sheet metal cylinder with two tubes in the upper and lower regions for inserting thermometers through rubber stoppers. Mounted on a base and encircled midway by an outer trough for holding a mixture of ice and salt. Temperature of the water is measured at the top and bottom of the inner cylindrical vessel over a period as the water-cools.SKU: n/a -
-
-
Engines & Heat Physics Labware
Hypsometer Copper
For the determination of the upper fixed points of thermometers and boiling points at barometric pressures other than atmospheric. Double walled copper cylinder 34 x 6 cm height x outer dia mounted on steam boiler.
Fitted with thermometer tubulure at the top, side outlet draining tube and glass manometer mounted in tubulure with rubber bungs.
SKU: n/a -
Mechanics Physics Labware
Inclined Plane
For investigating sliding friction. Consists of a plane board hinged at the base at one end with a pulley for the force cord at the other end. A moveable block enables the inclination of the plane to be varied. Complete with 100 x 65mm. Reversible friction slider and 70 x 25mm. Metal roller. Board dimensions: 600 x 75mm., Fitted with graduated arc.
SKU: n/a -
Mechanics Physics Labware
Inclined Plane Simple
Simple, hardwood comprising, cut-away base to allow cord to hang freely and hinged plane 60 x 7.5 cm. with aluminium pulley 28 mm. diameter, and stepped lower face to accommodate wood block for setting at angles between 24 and 45 deg. Approximately with cylindrical metal roller and scale pan.
SKU: n/a -
Magnetism Physics Labware
Induction Coil (Ruhmkorff Coil)
Induction Coil (Ruhmkorff Coil ) for Physics Lab – The primaries are wound with thicker copper enamelled covered wire on letherite pipe in two layers. The secondary coils are divided into two parts & are given heavy insulation. Each layer is wound in a cover of butter paper & are completing the winding, the entire is dipped into hot wax to seal each layer against moisture effect. The coils are housed in a teakwood base, voltage tested condensers are fitted inside the wooden polished base. Handles to get the spark are fitted on it & make or break points are of silver. One point is adjustable to get any cycle. On/off reversing switch commutator working on 6 to 12 V DC. Size – 10 mm, 25 mm, 50 mm, 75 mm, 100 mm
SKU: n/a -
Magnetism Physics Labware
Induction Coil Demonstration Model
Demonstration Induction Coils consists of two coils wound on separate bobbins, one having many turns of fine wire & the other with few turns of heavy wire. It demonstrates that induced potentials are produced either by movement of a permanent or electromagnet or by a change of current in one coil, fitted with insulated 4 mm socket terminals & supplied with a soft iron core, outer coil is 12.5 cm long & is of 5 cm diameter.
SKU: n/a -
Mechanics Physics Labware
Inertia Balance
It is a class room demonstration kit for qualitative investigation of nature of mass and making students understand distinction between mass and weight.
Kit comprises two metal trays 130 x 50 mm held 200 mm apart approximately on spring steel strips attached to the sides. One tray has holes to take three equal mass cylinders approximately (L x D) 100 x 25 mm each. The other tray acts as anchor and may be clamped to the bench either horizontally or vertically. Three support pins are supplied to fit radial holes in cylinders. Supplied complete with G clamp for mounting.
SKU: n/a
