Physics Lab
Showing 136–150 of 383 results
-
Mechanics Physics Labware
Flectchers Trolley
Comprises a lightweight aluminum track with leveling screws and cushioned stops at either end, pulley fixed towards one end, clamp for vibrator and automatic pen release.
A metal trolley with ball bearing mounted wheels to minimize friction, has five holes for accommodating cylindrical masses, including is a vibrator and pen holder with one each wooden blocks, to demonstrate the experiments on acceleration.SKU: n/a -
Fluid Mechanics Physics Equipment
Fluid Pressure Apparatus
To demonstrate the transmissibility of fluid pressure. The apparatus comprises two metal cylinders 15 mm and 30 mm dia respectively fitted with piston and connected by a tube. The pistons are provided with rods terminating in plate forms for loading with masses required. The complete apparatus is fitted on a wooden base.
SKU: n/a -
Magnetism Physics Labware
Force on a conductor balance
Force on a conductor balance – It is used to demonstrate that when a current is passed through a conductor in a magnetic field, it is subjected to a force of attraction or repulsion depending upon the direction of current in it. It consists of a plastic base 160 x 140mm on which two contact pillars are mounted. Each pillar is provided with an external circuit. A balance beam is supported by the pillars on two bearings, which form the fulcrum. Two screwed masses are provided in the beam system, one moving vertically for the adjustment of sensitivity and the other moving horizontally for the adjustment of the equilibrium position, when no current is flowing. Scale marked 0 to 75 x 1mm, rider of 1 gm weight.
SKU: n/a -
Fluid Mechanics Physics Equipment
Force Pump
A working model to demonstrate the principles involved in the action of a force-pump.
Cylinder is 25 x 350 mm dia x overall height. It is provided with a non-return float valve at its lower end. Lower part of the cylinder has an outlet side tube communicating with the lower end of another cylinder also equipped with non-return valve. Outlet tube from the secondary cylinder is drawn out into a jet to demonstrate ability of force pump to eject water at high pressure.
SKU: n/a -
Mechanics Physics Labware
Force Table
To verify the law of composition and resolution of forces.
This consists of machined aluminium table 40 cm. in diameter. Its raised rim has a scale, graduated in 360 degree, mounted on vertical support rod based provided with levelling screws. Body under study is a ring in center of the table fastened by cords passing over four pulleys, attached with the table.
Complete with four pulleys, four weight hangers, twelve weights 2 x 10 gm. 2 x 20 gm. 4 x 50 gm. 4 x 100 gm.
SKU: n/a -
Mechanics Physics Labware
Forces Apparatus
To verify the relationship between forces action at a point. Comprises board 65 x 50cm, with two aluminium pulleys, 50mm dia, on clamp, for mounting in any position..
Complete with three hangers iron nickel-plated 50gm and 12 slotted weights of 50gm each, supplied with reel of cotton thread and a ring.SKU: n/a -
Fluid Mechanics Physics Equipment
Fortins Barometer
A glass tube of 6mm bore is enclosed in an enamelled and lacquered brass case, mounted on a polished wooden board with plates for fixing on wall. Open plate reflectors, ring and screws for vertical adjustments. A dual scale graduated in 25 to 32 inches and 640 to 810mm is read by verniers moving by rack and pinion, reading to 0.002 inch and 0.1mm are enclosed in a glass cylinder. A glass cistern at the lower end of barometer is provided with an ivory point to adjust the level of mercury. A thermometer -10 to 50C is provided on the wooden board. Supplied without mercury and glass case.
SKU: n/a -
Mechanics Physics Labware
Free Fall Apparatus
This apparatus is used to determine G by measuring the time of fall of a steel ball through a pre- determined distance..
The time taken being less than one second, a centi second/ milli second timer capable of measuring the time in fraction of seconds has to be used.
Comprises two units each of which is mounted on a plastic which can be clamped on a 12 mm diameter retort rod. Connections are taken out to 4 mm sockets. The solenoid unit has a metal core which facilitates prompt release of the sphere on de-energizing.
The gate switch comprises a hinged steel plate to hold against an adjustable contact by means of a small permanent magnet, the plate falls away promptly at the impact of falling steel ball. The apparatus is supplied with a solenoid unit, gate switch, Steel Ball 18 mm dia and a stand.
SKU: n/a -
Mechanics Physics Labware
Friction Board
It comprises a wooden friction board 480 x 75 x 18 mm, a wooden slider with hook 140 x 70 x 18 mm, a plain aluminium slider and an aluminium slider with rubber backing, an additional long aluminium slider is provided which fits over the friction board to provide an alternative surface type
SKU: n/a -
-
