Physics Sound & Waves Lab
Ripple Tank Accessories
Dropper, Rubber tubes, Hoffman clip, wooden rod, Sponge, Trapezoidal shaped disc, Elliptical Reflector
Related products
-
Physics Sound & Waves Lab
Ripple Tank
The apparatus consists of a wooden framed tray with a plate glass base and detachable legs, overall size of tray 600x 520x 56mm deep.
A pair of support rods with integral ‘G’ clamps is provided which can be attached to the sides of the tank and used to carry the wave generating system. A set of 4 metal barriers (reflectors) is included consisting of a pair of straight barriers 150 x 25mm, a curved barrier of 215 mm. chord length x 25mm high and a short, straight barrier 25 x 25mm, to minimize unwanted reflections from the sides of the tank a set of four loose gauze strips are provided which, when is use, are arranged around the edges to from a ‘beach’ on all sides.
SKU: n/a -
Physics Sound & Waves Lab
Tuning Forks on Resonance Box
Three Tuning forks are mounted on three wooden resonance boxes dimensions of which are compatible with frequency of the forks to produce a strong sustained tone. Forks are nickel plated with shanks to screw in the bushes on the top of the boxes. Each set supplied with rubber headed hammer.
SKU: n/a -
Physics Sound & Waves Lab
Ripple Tank (Dual Purpose)
The apparatus consists of a framed tray with a plexi glass base and detachable legs, overall size of tray 600 x 520 x 56 mm deep. A pair of support rods with integral ‘G’ clamps is provided which can be attached to the sides of the tank and used to carry the wave generating system. A set of 4 metal barriers (reflectors) is included consisting of a pair of straight barriers 150 x 25 mm, a curved barrier of 215mm chord length x 25mm high and a short, straight barrier of 25 x 25 mm.
SKU: n/a -
Physics Sound & Waves Lab
Tuning Fork Electrical
Mounted on sturdy streamlined base with provision for horizontal or vertical use, fork is manufactured from selected steel. Prong is 10 x 25 x 300 mm. accurate frequency adjustment, vibrations rate 60 per second. Electromagnet can work on 6 Volts. The amplitude of vibration can vary by sliding the electromagnet inside the prongs.
SKU: n/a
There are no reviews yet.