Electronics Lab Experiments
Semiconductor – N-P-N Transistor Unit
Mounted on transparent base, with 4mm color coded sockets, with circuit diagram printed for demonstration.
Related products
-
Electronics Lab Experiments
Oscilloscope Dual Trace 20 MHz
Elegant, DC to 20MHz Bandwidth 1mV/div Sensitivity on Both Channels CH1 & CH2 Independent Channels CH1 or CH2 Trigger Signal Output Algebraic Addition and Subtraction X-Y Operation 10ns/div to 0.2s/div Time Base Z Modulation TTL Level 8 x 10 cm Display Internal Graticule TV Triggering Frame (V) & Line (H) Line Trigger, ALT Triggering, Trigger Lock Facility, Single Sweep, Variable Hold Off, Component Tester.
SKU: n/a -
Electronics Lab Experiments
Power Supply A.C/D.C Low Voltage
Details for Power Supply A.C/D.C Low Voltage for Physics Lab
2 to 12 volts in step of 2 volts.
.
Four 4mm socket terminals for AC and DC output separately with fuse and indicator in ventilated painted steel cabinet.
a) 4 Amp.
b) 5 Amp.SKU: n/a -
Electronics Lab Experiments
Power Supply (D.C) Regulated (Digital) 0-30V: Capacity: 10A
The DC Regulated Power Supply is an easy to use, low ripple high regulation precision instrument. Its unique feature is overload protection which makes it a safe power source for testing of electronic equipment.
Both voltage and current are precisely regulated with low output ripple. The power supply can be operated in either constant voltage or constant current mode and is protected against overload or short circuit by means of automatic cross-over characteristics from C.V. to C.C.
The output voltage and currents can be read on a meter. A switch is provided to select the LOW or HIGH’ range of current. Maximum voltage is 30 volts.
Specification
Indication of: 3 1/2 digital panel meter voltage/ currentor analog panel meter
Accuracy of DPM: 0.5% + 1 digit
Line Regulation: 0.05% plus 2 mv(for + 10% change in mains voltage)
Protection: Automatic cross-over type of output characteristic from C.V. to C.C.
SKU: n/a -
Electronics Lab Experiments
Power Supply 5 KV E.T.H.
Output 100 to 5 KV at 3 mA continuous. Fully floating EHT circuits suitable for operation of spart, counters, discharge tubes etc. Provided variable output upto 5 KV. The EHT circuit are fully floating so that certain experiments the positive or negative terminals may be safely connected to earth..
The EHT output are taken from 4mm sockets and displayed on a 0 to 5 KV meter. Also on the front panel are a mains switch and indicator lamp. The main fuse is mounted on the back panel. In a robust metal case with feet, mains cable fitted by moulded connector. Cable and connector removable for storage. Workable on 220V 50 Hz.
SKU: n/a
There are no reviews yet.