Moving coil for D.C. measurements, Any single range 0-1, 1.5, 3, 5, 10 Amps.
Your Rating Rate… Perfect Good Average Not that bad Very Poor
Your Review
Name *
Email *
There are no reviews yet.
This model uses the same basic assembly as the electric motor, mounted on a base plate which also carries a hand drive pulley 120 mm in diameter coupled to the smaller dynamo pulley by a rubber belt. Electric output is via a pair of 4 mm socket & a light emitting diode is provided as simple output indicator. The model may also be used as motor on a 4 to 8 volts DC supply.
4mm Pin, 18mm long spring insert and hard plastic body. Overall lenght of plug 40mm.
Laminated core to form a roughly rectangular core 92 x 56 x 20 mm approx. With a cross section of 20 x 12 mm & is cut across the middle to produce 2 equal ‘C’s. A strong spring steel strip is provided to hold the two halves together.
Continuously variable voltage auto transformer, protected type.
. Comprises a torridly wound transformer with a continuously variable output voltage 0 – 260 volts AC. Steplessly under full load. Input 220 to 240 volts AC, 50 Hz. In stout metal case mounted on a metal base with mains cable.
1
2
3
4
5
Capacity (amps.)
8
10
15
There are no reviews yet.