12V 3V for use with smoke cell & multiple light source.
Your Rating Rate… Perfect Good Average Not that bad Very Poor
Your Review
Name *
Email *
There are no reviews yet.
Laminated core to form a roughly rectangular core 92 x 56 x 20 mm approx. With a cross section of 20 x 12 mm & is cut across the middle to produce 2 equal ‘C’s. A strong spring steel strip is provided to hold the two halves together.
A contact arm & three metal studs mounted on a bakelite base with three brass terminals. The centre terminal is common connection to the arm & the other two terminals connected to the other studs.
Each centre hole coil is wound on a plastic former & is provided with 4 mm socketed terminals.
The coil fits onto a double ‘C’ core, provides a suitable transformer for operation from a low voltage AC supply. In addition, it provides a useful electromagnet if used on one half of a ‘C’ core.
A brass C.P. spring arm with press knob & two brass terminals. All mounted on bakelite base 80 x 55 mm.
There are no reviews yet.