Fluid Mechanics Physics Equipment
Force Pump
A working model to demonstrate the principles involved in the action of a force-pump.
Cylinder is 25 x 350 mm dia x overall height. It is provided with a non-return float valve at its lower end. Lower part of the cylinder has an outlet side tube communicating with the lower end of another cylinder also equipped with non-return valve. Outlet tube from the secondary cylinder is drawn out into a jet to demonstrate ability of force pump to eject water at high pressure.
Related products
-
Fluid Mechanics Physics Equipment
Fortins Barometer
A glass tube of 6mm bore is enclosed in an enamelled and lacquered brass case, mounted on a polished wooden board with plates for fixing on wall. Open plate reflectors, ring and screws for vertical adjustments. A dual scale graduated in 25 to 32 inches and 640 to 810mm is read by verniers moving by rack and pinion, reading to 0.002 inch and 0.1mm are enclosed in a glass cylinder. A glass cistern at the lower end of barometer is provided with an ivory point to adjust the level of mercury. A thermometer -10 to 50C is provided on the wooden board. Supplied without mercury and glass case.
SKU: n/a -
Fluid Mechanics Physics Equipment
Barometer Aneroid Demonstration
Demonstration type, fully enclosed in a transparent synthetic case for demonstration. 100 mm coated dial reads from 28 to 32 inches and 950 to 1040 millibars, air tight sealed all around, pressure rubber bulb provided to force the movements, for educative demonstration.
SKU: n/a -
-
Fluid Mechanics Physics Equipment
Hares Apparatus
This apparatus is used to compare the densities of liquids. It comprises of three limbed glass tube side limbs 45 cms long and rubber tubing on the centre limb closed by mohr clip.
Mounted on wooden stand with a 45 cm long scale on both limbs with zero at bottom. The densities of liquid are compared by measuring heights of the two columns of the liquid by applying suction to centre limb.
SKU: n/a
There are no reviews yet.